*Excludes: Areas prone to getting wet such as bathrooms, toilets and laundries.
Commercial 32 AC 5
Selected Decors with moisture protection
We have made the best even better: high-quality décors from the MAMMUT PLUS, MAMMUT, AMAZONE laminate collections have been optimised in order to withstand moisture penetration even longer. The resin-rich pine from ‘Brandenburg, Germany’ and special gluing processes ensure significantly reduced swelling of the laminate flooring.
The natural product is particularly suitable for children and pets who are in frequent contact with the laminate flooring. It can easily forgive a mishap or two.
Laminate flooring is usually to be cleaned by means of a damp wipe. The floors with moisture protection can be easily cleaned with a damp mop.
Like all wood-based products, this laminate flooring will react to the moisture and expand or contract accordingly. Although designed for improved resistance to water and moisture, it is not waterproof and excessive wetting and standing water should be avoided.
Suitable for kitchen, corridor and entrance areas.
Not suitable for outdoor areas, rooms with permanently high moisture load, e.g., bathrooms, shower cubicles, saunas and rooms with floor drains.
These panels are especially narrow.
These panels have a special surface structure.
A 5G snap-together system makes the flooring even easier to install.
V4 - all the way round
These panels feature a 45° sloped edge. When they are joined together, a V-groove forms, producing a natural solid wood character. V4 – all the way round
General approval for use in construction by Deutsches Institut für Bautechnik (German Institute for Civil Engineering)
|Formaldehyde emission||< 0.05 ppm||EN 717-1|
|Surface stain resistance||Grade 5, no visible changes to surface||EN 438-2, 15|
|Lightfastness||≥ Level 6 Blue Wool Scale
≥ Level 4 Grey Scale
|EN ISO 105-B02
EN 20 105-A02
|Resistance to cigarette embers||Grade 4, no visible changes to surface||EN 438-2, 18|
|Fire resistance||Ignites with difficulty, at least Cfl-s1||EN 13501-1|
|Height difference between connected elements||Average: ≤ 0.10 mm
max: ≤ 0.15 mm
|Edge straightness (bend)||≤ 0.3 mm/m||EN 13329|
|Openings between connected elements||Average: ≤ 0.15 mm
max: ≤ 0.20 mm
|Static indentation||< 0.01 mm - no visible changes, Impression in test with straight steel cylinder of 11,3 mm diameter||EN 433|
|Strength||Thermal conductivity (W / (m × K))||Overall heat transfer coefficient Thermal |
resistance ((m² × K) / W)